Nichrome = 4 ohms.
Thursday, April 29, 2010
Makerbot #453 : Ceramic Heated Build Platform (HBP) part #1
I started building my HBP. I have the V. 1.0 and will try to build it like a V.1.1.
Nichrome = 4 ohms.
Nichrome = 4 ohms.
Wednesday, April 28, 2010
Makerbot #453 : Back on track !
After weeks without using my printer, i'm back !
I started to print a mini-mendel ( Mini-Mendel Production Files by cyrozap) and it look good. I only printed the first sheet for now. It took about 80 minutes. I only have a small curve because the acrylic bent a little bit. I will post picture tonight...
My next step is to build my Heated bed. I will test it with the next Mendel parts.
I Also have to correct 2 littles problem on my bot : Z rods wobbling and X-Y vibrations.
I will take care of the vibration when modifying the build plate.
I started to print a mini-mendel ( Mini-Mendel Production Files by cyrozap) and it look good. I only printed the first sheet for now. It took about 80 minutes. I only have a small curve because the acrylic bent a little bit. I will post picture tonight...
My next step is to build my Heated bed. I will test it with the next Mendel parts.
I Also have to correct 2 littles problem on my bot : Z rods wobbling and X-Y vibrations.
I will take care of the vibration when modifying the build plate.
Subscribe to:
Posts (Atom)